In the Denver metro area, tankless water heater installations generally fall between $3,000 and $6,500. The price depends on system size, fuel type, and whether upgrades to gas lines, electrical capacity, or venting are needed. Tankless systems cost more upfront but can deliver long-term efficiency and space savings.
For Denver-area businesses, sewer excavation is typically scheduled and staged to minimize disruption while keeping the property safe and accessible whenever possible. Depending on where the sewer line runs, there may be temporary impacts to parking, delivery paths, entrances, or restroom use during parts of the repair. A clearly marked work zone, safety barriers, and upfront communication about timing help you plan around the work and reduce downtime.
P-traps are positioned directly below or just beyond plumbing fixtures to stop sewer gases before they enter the home. They’re designed to be as close as possible to the drain opening so the water seal stays effective.
You’ll commonly find them beneath sinks, below shower and tub drains, at laundry standpipes, and beneath floor drains. Toilets include a built-in trap as part of the fixture itself, even though it looks different from a traditional P-trap.
Because some traps are hidden behind walls or under floors, issues like leaks, clogs, or dried-out seals can go unnoticed until odors or drainage problems appear. Knowing where traps are placed helps homeowners understand why professional diagnosis is sometimes necessary.
If a drain smells off or isn’t working like it should, Done! can pinpoint the issue quickly. For experienced plumbers for Denver, our team delivers clear answers and long-term solutions you can trust.
In nearly all residential plumbing systems, P-traps are required by local and national plumbing codes. Their role is critical: they create a physical barrier between your home and the sewer system by holding water in the drain line.
Without a P-trap, sewer gases can flow freely into living spaces, creating health concerns and persistent odors. This is why sinks, showers, tubs, floor drains, and laundry drains are designed to include a trap as part of their installation.
Homes without proper traps — often due to age, past renovations, or DIY work — may still function but are typically out of compliance. These setups are common sources of unexplained smells and failed inspections.
If you’re unsure whether your plumbing meets current requirements, Done! can inspect your system and recommend the right fix. Homeowners looking for trusted plumbers for Denver can rely on our team to bring systems up to code with minimal disruption.
In tight spaces, older homes, or remodels, there may not be enough vertical or horizontal clearance for a traditional P-trap. This is common under pedestal sinks, in basement bathrooms, or where plumbing wasn’t originally designed for modern fixtures. Even when space is limited, plumbing code still requires a proper trap to block sewer gases.
In these situations, a licensed plumber can often rework the drain layout, lower the drain line, or install a compact, code-approved solution such as a shallow P-trap or a properly vented alternative. The goal is always the same: maintain a water seal while ensuring the drain functions safely and efficiently.
This is where experience matters. Improvised or DIY fixes may seem to work at first, but they often lead to slow drains, recurring odors, or failed inspections down the road. A professional evaluation ensures the solution is both functional and compliant.
If space constraints are causing drain issues or preventing a proper installation, Done! provides expert solutions tailored to real-world homes. When you need reliable plumbers for Denver, our team can assess the situation and make sure your plumbing works the way it should.
Thinking about upgrading your furnace? You’re probably wondering what the furnace installation cost Denver homeowners can expect—and what factors truly drive those numbers. It’s an important decision. A well-chosen, professionally installed furnace can lower energy bills, improve comfort, and provide dependable heat for years to come.
Modern systems also bring efficiency advantages that pay off long-term. While the initial investment matters, performance, reliability, and operating costs make all the difference. That’s where expert guidance helps.
At Done! Plumbing, Heating, Cooling & Electric, we make furnace replacement simple and transparent. From equipment selection to installation and maintenance, our team walks you through every cost consideration to help you make an informed choice.
Finding the right furnace is the first step toward a smart investment. The goal isn’t just to stay warm, it’s to ensure efficiency, reliability, and value season after season.
Our certified HVAC experts evaluate your home’s fuel type, layout, and energy goals to recommend the ideal system. Whether you’re considering a gas, electric, or oil furnace, we make sure it’s properly sized and installed for lasting performance.
Every Done! installation comes backed by our Home Comfort Guarantee, trusted brands, and transparent pricing, so you can feel confident before you even see the final quote.
As you explore your options, it’s helpful to understand how pricing works. The total cost of a furnace depends on the fuel type, size, and efficiency rating—each playing a role in your system’s performance and long-term savings. While a lower upfront price might seem appealing, investing in energy-efficient equipment with dependable features and strong warranties often pays off over time.
At Done, we guide you through these choices with clear, upfront recommendations, helping you balance cost, efficiency, and comfort for the best overall value.
The expense of installing a furnace extends beyond the purchase price of the unit. Factors such as your home’s design, existing systems, and the complexity of installation all contribute to the overall cost. We provide transparent evaluations to ensure precise estimates.
Larger homes often require greater heating capacity due to their square footage and multiple levels. Homes with poor insulation or drafty windows may need more robust systems, while inefficient ductwork might call for design modifications to enhance performance.
| Home Size / Capacity | Recommended Furnace Size (BTU) | Notes |
|---|---|---|
| Small to mid-sized homes | 40,000–80,000 BTU | Suitable for most single-story or compact homes. |
| Larger homes | 90,000–120,000 BTU | Needed for bigger homes or those with high ceilings. |
| Multi-level / open layouts | Varies | May require advanced airflow features for even heating. |
Fuel type and local costs impact expenses:
Gas is economical in areas where it’s available, with modern gas furnaces providing dependable service. Electric systems are easy to install and suitable for milder climates, though costs vary with electricity rates. Oil is an option where gas is unavailable, but it necessitates proper tank maintenance.
| Furnace Type | Typical Installation Notes | Estimated Cost Range |
|---|---|---|
| Gas Furnace | Most common in Denver. Pricing varies based on efficiency (80–99% AFUE), venting requirements, and existing gas line condition. High-efficiency models may need new PVC flues or condensate drains. | $8,000–$14,000 |
| Electric Furnace | Easier to install if the home’s electrical panel can support it. Best for smaller homes or where gas lines aren’t available, though higher electricity rates can increase long-term costs. | $7,000–$12,000 |
| Oil Furnace | Less common in the Denver area. Requires an oil tank, venting, and regular maintenance. Installations are typically more complex and costly. | $9,000–$15,000+ |
High-efficiency models demand specialized venting and flues, while electrical upgrades might require new circuits or panel improvements. Limited installation spaces can lead to additional labor, and obtaining necessary permits and inspections is crucial for safety compliance.
| Efficiency Level (AFUE) | Description | Upfront Cost Impact |
|---|---|---|
| 80–85% (Standard Efficiency) | Converts 80–85% of fuel into heat. | Lower |
| 90–99% (High Efficiency) | Converts up to 99% of fuel into heat. | Higher |
A new furnace is more than just a piece of equipment—it’s an investment in your home’s comfort and efficiency. At Done Plumbing, Heating, Cooling & Electric, we handle every detail with precision and transparency to help you get the most value for your money.
Expert Installation & Setup
Our licensed technicians install every furnace to code and optimize it for peak efficiency. Most replacements are completed in a single day, and we take care of all permits and inspections—so you can relax knowing everything’s done right.
Efficiency Upgrades & Airflow Improvements
Proper ductwork and balanced airflow make all the difference. We seal leaks, fine-tune your system, and can add upgrades like smart thermostats, air purifiers, or humidifiers to boost performance and comfort.
Protection & Long-Term Savings
Every installation is backed by our Home Comfort Guarantee and strong manufacturer warranties. Join our Care Club for regular maintenance, priority scheduling, and exclusive savings that keep your system running efficiently year after year.
Simple Steps for Lasting Results
With Done, you get expert craftsmanship, honest pricing, and a system built to last—no hidden fees, no surprises, just dependable warmth when you need it most.
Replacing your furnace is a big step toward a warmer, more efficient home—and with flexible financing, you don’t have to put it off. At Done Plumbing, Heating, Cooling & Electric, we make it easy to upgrade now and pay over time, so you can get the right system without straining your budget.
Our financing options are designed for real homeowners and real budgets:
Most homeowners qualify quickly, with straightforward applications and flexible terms. You’ll always get clear details—no surprises, no hidden fees.
Financing also lets you choose what’s best for your home right now:
Our experts will guide you through all available options to find a plan tailored to your requirements—because at Done, your comfort is our priority.
Your furnace installation cost depends on several factors—fuel type, size, efficiency, and the details of your home. While high-efficiency models can cost more upfront, they often save you money for years through lower energy bills and better performance.
At Done Plumbing, Heating, Cooling & Electric, we make the process simple and transparent. Our experts evaluate your home, explain your options, and give you a clear, no-surprise estimate before any work begins.
Call us now to get started with your furnace estimate and find out exactly how much a new furnace costs in Denver—with expert guidance, upfront pricing, and guaranteed quality from Done.
Most dishwasher installations are straightforward when existing connections are in good condition and the new unit fits the existing space. In these cases, installation can often be completed within a couple of hours.
Installation time may be longer if the old dishwasher needs to be removed, if plumbing or electrical connections need adjustment, or if cabinetry requires modification to accommodate the new appliance. Issues such as outdated shutoff valves, improper drain connections, or limited access can also add time to the process.
A proper installation includes verifying that water, drain, and electrical connections are secure and testing the dishwasher to ensure it operates correctly before use.
Attic fans help reduce heat buildup by pulling hot air out of the attic space. Proper ventilation can lower attic temperatures, reduce strain on the air conditioning system, and help manage moisture that can affect insulation and roof components.
Before installation, the attic is evaluated to determine ventilation needs, airflow requirements, and proper fan placement. Installation may include adding a new attic fan, replacing an older or non-functioning unit, or improving ventilation in homes that were not originally designed with adequate airflow.
Attic fans are often beneficial in homes that experience excessive attic heat, uneven cooling, or higher cooling demands during warm weather. Professional installation ensures the fan is properly sized, safely installed, and integrated with the home’s existing ventilation system.
Done Plumbing, Heating, Cooling & Electric installs attic fans and evaluates attic ventilation to help support better airflow, efficiency, and long-term system performance.
Attic fans help remove trapped hot air from the attic, which can lower overall attic temperatures and reduce heat transfer into living spaces. By improving ventilation, they help the home feel more comfortable and reduce how hard the air conditioner has to work.
Proper attic ventilation can also help protect roofing materials and HVAC components from excessive heat and moisture. Over time, reducing heat buildup in the attic can contribute to better system efficiency and fewer heat-related issues.
Homes with poor ventilation, noticeable attic heat, uneven indoor temperatures, or high cooling demand often benefit the most from attic fans. A professional evaluation helps determine whether an attic fan is the right solution and which type will perform best.
Done offers attic fan installation tailored to the home’s structure and ventilation needs, helping improve airflow, efficiency, and long-term performance.pert attic fan installation tailored to your home’s structure, with upfront pricing and trusted service.
As hot air rises and becomes trapped in the attic, the fan exhausts that heat to the outside. This creates continuous airflow that helps prevent excessive heat buildup, especially during warm weather.
By lowering attic temperatures, attic fans reduce the amount of heat that transfers into living spaces below. This can ease strain on the air conditioning system, help maintain more consistent indoor temperatures, and reduce overall cooling demand.
Consistent airflow in the attic can also help manage moisture and protect roofing materials from heat-related wear. Properly ventilated attics support both HVAC performance and long-term roof durability.
Done Plumbing, Heating, Cooling & Electric installs attic exhaust fans designed to keep attics properly ventilated and operating efficiently year-round.nd.
Replacing a water heater element is possible for experienced homeowners, but improper installation can cause leaks or electrical issues. Hiring a licensed Denver professional helps ensure the repair is done safely and meets local requirements.
For most Denver-area homeowners, installing a traditional tank water heater ranges from $900 to $2,500. Pricing varies based on the size of the unit, whether it’s gas or electric, energy efficiency, and the condition of existing plumbing and venting. Homes with older systems or tighter utility spaces may require updates to meet current local codes.
