Open Every Day, Honest Every Time. Weekend Appointments Available!
Open Every Day, Honest Every Time. Weekend Appointments Available!
Denver winters don’t behave like winters in most parts of the country, and your thermostat shouldn’t be treated like they do. High elevation, intense sun, dry air, and fast-moving weather systems create bigger temperature swings and more uneven heating across Front Range homes.
Our HVAC technicians see it every winter: south-facing rooms that warm up in the afternoon and cool quickly after sunset, systems that cycle more during sudden cold fronts, and homes where the thermostat setting sounds right but still feels off. Managing humidity, sun exposure, and day-to-night temperature changes — often with a programmable or smart thermostat — helps you find the best winter setting without overworking your heating system or driving up energy costs.
Use these ranges as a starting point. Adjust one degree at a time until your home feels steady and your bills make sense.
| Situation | Recommended Set Point | Notes |
|---|---|---|
| Home during the day | Around 68°F | Common balance of comfort and efficiency in well-sealed homes. |
| Nighttime | 60–62°F | Lower by 6–8 degrees from your evening setting; use proper bedding. |
| Away for the day | 60–62°F | Cuts run time without long warm-ups. |
| Extended trips | At least 60°F | Avoid going below the mid-50s to limit frozen pipe risk. |
Home characteristics matter. Tight, well-insulated homes can stay comfortable at slightly lower set points. Drafty homes or those with thin attic insulation may need a small bump until air sealing and insulation are improved. If you’re unsure of the best temperature to set thermostat in winter for your space, start at 68°F, then tweak based on how rooms feel in the evening and early morning.
Different systems deliver heat differently, which can change what temperature feels “right.” This is key when choosing a thermostat setting for winter that you’ll stick with.
If your home struggles to reach or hold the set point, it may be a system or control issue. Uneven room temperatures, short cycling, or loud runs are signs it’s time for a check. Done! offers furnace repair and thermostat evaluations to get things back on track fast.
Lowering your set point by about 7–10 degrees for 8 hours can deliver meaningful thermostat energy savings winter after winter. Your home loses heat more slowly at lower indoor temperatures, and your furnace or heat pump runs less.
Consistency pays off. High-efficiency systems do best with planned schedules instead of frequent manual changes. A programmable or smart thermostat will warm the house before you wake or return, so comfort is there when you need it without wasting energy while you’re away.
If you want help building schedules or choosing the best thermostat in winter for your setup, our smart thermostat installation service includes setup, app connection, and training.
It’s comfortable for many households, but not always the most efficient. If your home is drafty, insulation is limited, or someone is more sensitive to cold – infants, seniors, or those with certain health conditions – 72°F may make sense during cold spells. For long-term savings, fix the root causes so the best temperature for heater in winter, around 68–70°F, feels just as good.
If temperatures vary room to room, schedule furnace maintenance to correct airflow or control issues before the next cold front.
For daytime absences, aim for 60–62°F. For longer trips, maintain at least 60°F and avoid going below the mid-50s. In Denver’s dry cold, pipes can be at risk when interior spaces hover near 55°F or lower, especially along exterior walls, basements, and crawl spaces. These practices support recommended thermostat settings for winter without risking damage.
Heading out of town? Making a small thermostat adjustment and checking your heating system can help prevent surprises. If you want a professional look, call Done! Heating & Cooling to schedule a system check before you leave.
Consider an upgrade if you notice temperature swings, rooms that don’t match the set point, short cycling, a flickering display, or odd run times. A worn sensor or miscalibrated thermostat can waste energy and undermine the best temperature to set thermostat in winter.
Modern options offer strong everyday value:
If your thermostat is 10 years old or lacks scheduling, upgrading can pay off quickly. Done handles smart thermostat installation, setup, and training so everything works on day one.
These basics often let you lower your thermostat in winter by a degree or two without sacrificing comfort — small changes that add up to thermostat energy savings winter after winter.
During a cold snap, your system may struggle. Before you crank the setting higher, check the simple stuff:
If issues persist—burner cycling, unusual noises, or no heat—book furnace repair. If your equipment is aging and fixes are adding up, we can compare heating system replacement options, including high-efficiency furnaces and cold-climate heat pumps. We also service hybrid systems and provide heat pump repair when needed.
Winter in Denver can change fast. You need clear guidance, on-time service, and work that holds up to the next cold front. Done! delivers all three. Since 1999, our licensed HVAC technicians have helped homeowners across Aurora and Greater Denver set schedules that work, prevent frozen pipes, and keep systems running efficiently. You get straightforward explanations, upfront pricing, and results that last.
If you’re ready to lock in the best temperature to set thermostat in winter for your home—or you want a smart upgrade that boosts thermostat energy savings in winter — One Call… It’s Done!
In this guide, we’ll explain what’s included in a professional furnace cleaning, typical inspection and tune-up cost ranges, and the factors that influence your final price. We’ll also outline simple, safe steps you can take between visits to keep your system running smoothly. Whether you’re planning ahead or troubleshooting a concern, this breakdown gives you the clarity you need to protect your home, and your wallet, with confidence.
A thorough cleaning focuses on safety, reliability, and efficiency. Our trained technicians remove dust and debris, inspect critical parts, and confirm that your system is operating the way it should. Here’s how service levels typically break down, and what the furnace cleaning cost and furnace maintenance cost look like:
Basic cleaning and safety check: typically $100–$200. Includes standard filter replacement, vacuuming accessible compartments, burner inspection, and a carbon monoxide safety test. This visit covers the essentials and helps you stay on track with annual maintenance.
Advanced cleaning and tune-up: generally $200–$400. Includes deeper cleaning of the blower assembly, accessible heat exchanger surface cleaning, burner calibration, ignition system service, condensate line cleaning for high-efficiency units, and airflow checks. A heating system tune up at this level is ideal if it’s been more than a year since your last service.
Premium cleaning with full maintenance visit: could be as much as $500. Includes advanced cleaning plus thorough diagnostics, minor adjustments, and priority scheduling. This level is designed to reduce breakdown risks and stabilize comfort all winter.
What affects your price:
Basic vs. advanced cleaning:
Professional service from Done! delivers consistent heat, fewer surprises, and better energy performance. Our certified technicians use specialised tools and calibrated testing to find hidden problems and fine-tune combustion and airflow — work that’s difficult and risky to manage without training. With Done, you get quick responsiveness, a customer-first approach, and work backed by our transparent service guarantee.
Efficiency and longevity benefits:
Health and safety advantages:
Impact on energy bills:
How long does it take? A standard visit usually lasts 60–90 minutes. Advanced cleanings and detailed diagnostics can 2 hours depending on your unit and condition. If you’re wondering how often should I have my furnace inspected, most homes benefit from annual maintenance with seasonal check-ins for high-efficiency systems.
What you can safely do yourself:
These quick tasks typically cost $15–$60 in basic supplies and help keep things running smoothly between tune-ups.
When DIY stops being safe: If you see soot, smell something unusual, hear odd noises, or feel uneven heat, it’s time to pause. Cleaning burners, adjusting sensors, handling electrical components, or opening sealed areas can easily lead to damage, safety issues, or voided warranties.
That’s where we come in.
Join the Care Club and enjoy an annual Done! furnace tune-up that includes comprehensive cleaning, testing, and safety checks you can’t — or don’t want to — perform yourself. This membership significantly reduces the risk of breakdowns and helps keep your energy costs consistent. If you notice any issues or want to arrange your yearly maintenance, our dedicated team is ready to assist you. We ensure a straightforward, efficient process that values your time.
Smart planning helps keep your visit affordable while protecting your system. Done offers programmes and deals designed to deliver lasting value with minimal disruption, and our no-hidden-fee pricing keeps every furnace maintenance cost transparent from the start.
Join the Done! Care Club for regular heating and cooling maintenance:
Seasonal offers for installations and repairs:
Bundle services for savings:
When you compare furnace inspection cost and furnace cleaning cost across providers, look for measurable results: combustion checks, airflow readings, and safety tests. We document these on every visit so you can see the improvement.
Choosing the right partner matters. With Done, you’re choosing a team that values your comfort and satisfaction as much as you do. We bring technical expertise and a caring, customer-first approach, backed by a transparent service guarantee and 24/7 availability.
Reliability and transparency:
Quality you can trust:
All-in-one home service:
If you’re weighing furnace maintenance cost against long-term reliability, our approach keeps your system efficient and safe without surprises. For oil-fired equipment, we’ll explain oil furnace cleaning cost and outline any soot-related steps before work begins.
Ready for a smoother heating season? Tell us your furnace type and any issues you’ve noticed, hot and cold spots, higher bills, unusual sounds, and we’ll provide a clear estimate. If you need service right away, we offer same-day appointments whenever possible. One call, and it’s Done.
Serving Denver and Aurora homeowners since 1999, we understand busy schedules and unpredictable weather. We keep communication simple, pricing upfront, and work efficient so you can get back to normal quickly. Whether you’re comparing furnace cleaning cost, furnace inspection cost, or planning annual maintenance, our team is ready to help with urgency, care, and results you can feel.
Thinking about upgrading your furnace? You’re probably wondering what the furnace installation cost Denver homeowners can expect—and what factors truly drive those numbers. It’s an important decision. A well-chosen, professionally installed furnace can lower energy bills, improve comfort, and provide dependable heat for years to come.
Modern systems also bring efficiency advantages that pay off long-term. While the initial investment matters, performance, reliability, and operating costs make all the difference. That’s where expert guidance helps.
At Done! Plumbing, Heating, Cooling & Electric, we make furnace replacement simple and transparent. From equipment selection to installation and maintenance, our team walks you through every cost consideration to help you make an informed choice.
Finding the right furnace is the first step toward a smart investment. The goal isn’t just to stay warm, it’s to ensure efficiency, reliability, and value season after season.
Our certified HVAC experts evaluate your home’s fuel type, layout, and energy goals to recommend the ideal system. Whether you’re considering a gas, electric, or oil furnace, we make sure it’s properly sized and installed for lasting performance.
Every Done! installation comes backed by our Home Comfort Guarantee, trusted brands, and transparent pricing, so you can feel confident before you even see the final quote.
As you explore your options, it’s helpful to understand how pricing works. The total cost of a furnace depends on the fuel type, size, and efficiency rating—each playing a role in your system’s performance and long-term savings. While a lower upfront price might seem appealing, investing in energy-efficient equipment with dependable features and strong warranties often pays off over time.
At Done, we guide you through these choices with clear, upfront recommendations, helping you balance cost, efficiency, and comfort for the best overall value.
The expense of installing a furnace extends beyond the purchase price of the unit. Factors such as your home’s design, existing systems, and the complexity of installation all contribute to the overall cost. We provide transparent evaluations to ensure precise estimates.
Larger homes often require greater heating capacity due to their square footage and multiple levels. Homes with poor insulation or drafty windows may need more robust systems, while inefficient ductwork might call for design modifications to enhance performance.
| Home Size / Capacity | Recommended Furnace Size (BTU) | Notes |
|---|---|---|
| Small to mid-sized homes | 40,000–80,000 BTU | Suitable for most single-story or compact homes. |
| Larger homes | 90,000–120,000 BTU | Needed for bigger homes or those with high ceilings. |
| Multi-level / open layouts | Varies | May require advanced airflow features for even heating. |
Fuel type and local costs impact expenses:
Gas is economical in areas where it’s available, with modern gas furnaces providing dependable service. Electric systems are easy to install and suitable for milder climates, though costs vary with electricity rates. Oil is an option where gas is unavailable, but it necessitates proper tank maintenance.
| Furnace Type | Typical Installation Notes | Estimated Cost Range |
|---|---|---|
| Gas Furnace | Most common in Denver. Pricing varies based on efficiency (80–99% AFUE), venting requirements, and existing gas line condition. High-efficiency models may need new PVC flues or condensate drains. | $8,000–$14,000 |
| Electric Furnace | Easier to install if the home’s electrical panel can support it. Best for smaller homes or where gas lines aren’t available, though higher electricity rates can increase long-term costs. | $7,000–$12,000 |
| Oil Furnace | Less common in the Denver area. Requires an oil tank, venting, and regular maintenance. Installations are typically more complex and costly. | $9,000–$15,000+ |
High-efficiency models demand specialized venting and flues, while electrical upgrades might require new circuits or panel improvements. Limited installation spaces can lead to additional labor, and obtaining necessary permits and inspections is crucial for safety compliance.
| Efficiency Level (AFUE) | Description | Upfront Cost Impact |
|---|---|---|
| 80–85% (Standard Efficiency) | Converts 80–85% of fuel into heat. | Lower |
| 90–99% (High Efficiency) | Converts up to 99% of fuel into heat. | Higher |
A new furnace is more than just a piece of equipment—it’s an investment in your home’s comfort and efficiency. At Done Plumbing, Heating, Cooling & Electric, we handle every detail with precision and transparency to help you get the most value for your money.
Expert Installation & Setup
Our licensed technicians install every furnace to code and optimize it for peak efficiency. Most replacements are completed in a single day, and we take care of all permits and inspections—so you can relax knowing everything’s done right.
Efficiency Upgrades & Airflow Improvements
Proper ductwork and balanced airflow make all the difference. We seal leaks, fine-tune your system, and can add upgrades like smart thermostats, air purifiers, or humidifiers to boost performance and comfort.
Protection & Long-Term Savings
Every installation is backed by our Home Comfort Guarantee and strong manufacturer warranties. Join our Care Club for regular maintenance, priority scheduling, and exclusive savings that keep your system running efficiently year after year.
Simple Steps for Lasting Results
With Done, you get expert craftsmanship, honest pricing, and a system built to last—no hidden fees, no surprises, just dependable warmth when you need it most.
Replacing your furnace is a big step toward a warmer, more efficient home—and with flexible financing, you don’t have to put it off. At Done Plumbing, Heating, Cooling & Electric, we make it easy to upgrade now and pay over time, so you can get the right system without straining your budget.
Our financing options are designed for real homeowners and real budgets:
Most homeowners qualify quickly, with straightforward applications and flexible terms. You’ll always get clear details—no surprises, no hidden fees.
Financing also lets you choose what’s best for your home right now:
Our experts will guide you through all available options to find a plan tailored to your requirements—because at Done, your comfort is our priority.
Your furnace installation cost depends on several factors—fuel type, size, efficiency, and the details of your home. While high-efficiency models can cost more upfront, they often save you money for years through lower energy bills and better performance.
At Done Plumbing, Heating, Cooling & Electric, we make the process simple and transparent. Our experts evaluate your home, explain your options, and give you a clear, no-surprise estimate before any work begins.
Call us now to get started with your furnace estimate and find out exactly how much a new furnace costs in Denver—with expert guidance, upfront pricing, and guaranteed quality from Done.
An air handler typically looks like a large metal box or cabinet, usually rectangular, that contains the blower motor, evaporator coil, and air filter. It is connected to your ductwork and is often located in a basement, attic, garage, or utility closet, depending on the home’s layout.
An air handler is one of the main components of your HVAC system, and at first glance, it usually looks like a plain metal box or cabinet. Most air handlers are rectangular and range in size from a large suitcase to a tall appliance, depending on the system and the size of the home. Inside the cabinet are key parts like the blower motor, evaporator coil, and air filter, all of which work together to circulate conditioned air throughout your home.
In many Denver-area homes, air handlers are commonly found in basements, utility rooms, attics, garages, or interior closets. Newer homes may have more compact, vertically mounted units, while older systems are often larger and easier to spot. You may also notice insulated ductwork connected to the unit, along with electrical wiring and a condensate drain line.
If you’re unsure whether you’ve found your air handler, or if the unit looks rusted, noisy, or oversized for the space, it may be a sign that it needs professional attention. For homeowners across the Denver metro area, including those in southern Denver with easy access from Aurora, Done! Plumbing, Heating, Cooling & Electric can help identify your air handler, inspect its condition, and recommend repair or replacement options when needed.
If your HVAC or cooling system is more than 10–15 years old, it may be nearing the end of its reliable lifespan. Older systems are more prone to breakdowns, often require frequent repairs, and may struggle to keep up with comfort demands.
As systems age, efficiency declines. Older units typically use more energy to produce the same level of cooling, which can lead to higher utility bills. If energy costs keep rising despite normal usage, replacement may offer better efficiency and long-term savings.
Home additions, renovations, or changes in household size can affect cooling needs. A system that was once properly sized may no longer be adequate, leading to uneven temperatures or overworked equipment.
If repairs are becoming more frequent, efficiency has dropped, or the system can no longer meet the home’s needs, replacement is often more cost-effective than continued repairs. A professional evaluation helps determine whether replacement is the right step.
Done! Plumbing, Heating, Cooling & Electric provides cooling system replacement evaluations to help homeowners choose reliable, efficient solutions that fit their home and comfort needs.
The Done! Care Club is designed to simplify home maintenance by providing regular, scheduled service for essential systems—especially heating and cooling equipment that requires ongoing care to operate efficiently and reliably.
Care Club memberships include routine HVAC maintenance, such as heating and air conditioning tune-ups, along with plumbing system inspections. These scheduled visits are intended to identify wear, efficiency issues, and minor concerns early, helping reduce the risk of unexpected breakdowns or more disruptive repairs.
Membership benefits include:
For homeowners in the Denver area, regular HVAC maintenance is especially important due to wide seasonal temperature swings. Keeping heating and cooling systems properly maintained can support consistent performance and help extend equipment lifespan.
The Care Club is structured to provide ongoing system care while giving homeowners clear visibility into the condition of their plumbing and HVAC systems throughout the year.
*Services and benefits are determined by the equipment installed in the home and the selected Care Club plan.
Ductless mini-splits use heat pump technology to move heat rather than generate it. In warm weather, they remove heat from indoor air to cool the space. In cooler weather, the system reverses operation to bring heat indoors, providing efficient heating.
Because they can both heat and cool, ductless mini-splits are well suited for year-round comfort. They are commonly used in spaces like additions, basements, garages, or rooms with inconsistent temperatures where traditional ductwork is limited or unavailable.
Mini-splits are designed to deliver targeted comfort with high energy efficiency. Their ability to adjust output based on demand helps maintain consistent temperatures while using less energy than many traditional systems.
Done! can help homeowners choose a ductless mini-split system that provides efficient heating and cooling tailored to their home and comfort needs throughout the year.
Indoor units are mounted on interior walls in the areas being conditioned, while the outdoor compressor is installed outside the home. Placement is chosen to support efficient airflow, accessibility, and overall system performance.
The indoor and outdoor units are connected by a small conduit that runs through a three-inch opening in the wall. This conduit carries refrigerant lines, electrical wiring, and a drain line, eliminating the need for extensive ductwork.
Once installed, the system is tested to confirm proper operation, airflow, and temperature control. Homeowners are shown how to use the controls and maintain the system for ongoing performance.
Proper installation ensures the system operates efficiently, quietly, and reliably. Professional setup also helps prevent leaks, airflow issues, and performance problems over time.
Done! provides professional ductless mini-split installation, handling placement, setup, testing, and system walkthrough to ensure smooth operation from day one.
Ductless mini-splits allow individual rooms or zones to be heated or cooled independently. This targeted control can reduce energy use by avoiding conditioning unused spaces, which may lead to lower utility costs.
Because they do not rely on ductwork, ductless systems are well suited for older homes, additions, garages, or remodeled spaces where ducts are not practical or cost-effective.
Mini-splits have a compact design and can be installed in a variety of configurations, including wall-mounted, ceiling-mounted, or floor-mounted units. This flexibility makes them adaptable to many room layouts and home designs.
Ductless mini-splits operate quietly and include built-in air filtration that helps reduce dust and airborne particles. This can contribute to improved indoor air quality and a more comfortable living environment.
Done! can help homeowners determine the best ductless mini-split configuration to achieve efficient, reliable comfort throughout the home.
Maintenance plan members typically receive priority scheduling and discounts on repairs. This can be especially helpful during peak heating or cooling seasons when service demand is high.
Regular maintenance visits include inspections, cleaning, and performance checks designed to catch small issues early. Preventive care helps extend the lifespan of HVAC equipment and reduces the likelihood of costly emergency repairs.
Routine service helps systems operate more efficiently, which can lower energy use and support consistent comfort throughout the home. Well-maintained systems are less likely to experience sudden failures.
Many manufacturers require regular maintenance to keep warranties valid. A maintenance plan helps ensure those requirements are met while giving homeowners confidence that their system is being professionally cared for year-round.
Done!’s Care Club maintenance plan is designed to support long-term system performance, efficiency, and dependable home comfort through scheduled professional care.
Air conditioning maintenance is best scheduled in the spring, before the cooling season begins. Furnace maintenance is typically recommended in the fall, ahead of the heating season. Servicing each system before peak use helps ensure reliable performance when it’s needed most.
Annual maintenance helps systems operate efficiently, reduces the risk of unexpected breakdowns, and allows potential issues to be identified early. Routine service also supports consistent comfort and energy efficiency throughout the year.
Keeping both systems on a regular maintenance schedule can extend equipment lifespan, improve reliability, and help avoid costly emergency repairs. It also helps ensure systems are prepared to handle seasonal demands.
Done! provides seasonal HVAC maintenance to help keep both air conditioning and heating systems running smoothly and reliably year-round.
Maintenance typically involves cleaning or replacing air filters, inspecting and cleaning AC coils, and checking the condensate drain to ensure proper moisture removal. These steps help maintain airflow, efficiency, and indoor air quality.
The thermostat is checked for accuracy and proper settings. Electrical connections, controls, and safety components are inspected to ensure safe and reliable operation.
Moving parts are lubricated to reduce wear, and system operation is tested to confirm proper startup, shutdown, and performance. For heating systems, the ignition, burners, and safety mechanisms are inspected to ensure proper function.
A comprehensive maintenance checkup helps systems run more efficiently, reduces the likelihood of unexpected breakdowns, and allows potential issues to be identified early.
Done! provides thorough HVAC maintenance checkups designed to support efficiency, reliability, and long-term system performance.