Same-Day Service
Most service calls handled same-day across the Denver metro — and we answer the phone 24/7.
Remodel Electrical Services
Your Renovation Deserves Electrical Work That Passes Inspection
Remodels create the perfect opportunity to fix what’s outdated and build in what you actually need — more circuits, better lighting, dedicated lines for appliances, and wiring that meets current code. Done has been the go-to electrical contractor for Denver-area homeowners since 1999, and we’ve worked on everything from single-room kitchen upgrades to whole-home renovations. We coordinate cleanly with your GC or work directly with you if you’re managing the project yourself.
From rough-in wiring during framing to trim-out after drywall is hung, we’re with you through every phase. We also pull the required permits so your project passes final inspection without delays. Explore our full installations and remodels services or call 833-539-9153 to talk through your project timeline.
- All Phases Covered Rough-in, trim-out, panel work, and final connections — we handle every electrical phase of your remodel, start to finish.
- Permit Ready We pull permits and coordinate inspections. Your finished project is fully code-compliant and documented for resale.
- Works with Your GC We've partnered with general contractors across the Denver metro for years. We show up on schedule and communicate clearly with your whole team.
When You Need an Electrician for Your Remodel
These Situations Call for a Licensed Pro
Electrical work in a remodel is not a DIY shortcut. Here are the common scenarios where homeowners need a licensed electrician to get things right and get the permit.
-
Kitchen Remodel
Modern kitchens require dedicated circuits for refrigerators, dishwashers, microwaves, and countertop appliances. Adding circuits during a remodel is far easier than retrofitting later.
-
Room Addition or ADU
Any new living space needs its own circuits, outlets, lighting, and in many cases a subpanel. We design the electrical layout and wire it to code from the ground up.
-
Basement Finish
Finishing a basement means running new circuits through concrete and framing. We handle egress lighting, outlet placement, and any dedicated lines for a home office, gym, or wet bar.
-
Bathroom Remodel
GFCI protection, exhaust fan circuits, vanity lighting, and heated floor wiring — bathroom electrical has specific code requirements that a licensed electrician needs to handle.
What Done Handles
Remodel Electrical Services We Provide
Whether you're expanding your home or reimagining a single room, Done brings the experience and licensing to get the electrical right.
- New Circuit Installation We add dedicated circuits for appliances, HVAC equipment, home offices, and entertainment systems — sized correctly and run cleanly through walls and ceilings.
- Lighting Design and Installation Recessed cans, under-cabinet lighting, pendant fixtures, and dimmer-compatible circuits. We help you plan the layout, not just pull the wire.
- Panel Upgrades During Remodels Adding circuits to an older 100A panel often isn't possible without an upgrade. We assess capacity and upgrade when needed — a smart move to do while walls are already open.
- Code Compliance and Inspections We know what Denver-area inspectors look for. We wire to current NEC standards and handle permit applications so your project closes cleanly.
How It Works
Electrical for Your Remodel — From Plan to Pass
Remodel projects move fast. Here's how Done fits into your timeline without slowing things down.
-
Project Consultation
Call 833-539-9153 or schedule online. Share your project scope and timeline. We'll walk through what's needed electrically before demolition begins.
-
Electrical Plan and Permit
We map out the circuit layout, outlet placements, and lighting plan. Then we pull the permit so everything is in order before rough-in begins.
-
Rough-In and Trim-Out
We wire during framing and return after drywall for trim-out — installing devices, fixtures, and covers. We coordinate with your GC to hit each milestone on time.
-
Final Inspection
We meet the inspector, walk through the work, and get your project signed off. You get documentation that the electrical meets current code.
Current Specials
Save on the work your home needs most.
Why Choose Done
Upfront Pricing
Flat-rate pricing approved before work begins — no surprises on the invoice.
Licensed & Insured
Fully licensed, bonded, and insured — plumbing, HVAC, and electrical under one roof.
Satisfaction Guaranteed
If it isn't right, we make it right — backed by our workmanship guarantee.
Planning a Remodel? Let's Talk Electrical.
Done's licensed electricians work with homeowners and GCs across the Denver metro. Call 833-539-9153 anytime.
What Our Customers Say
Don't just take our word for it — hear from our satisfied customers
★★★★★
Tyler was very personable, informative, and cleaned up after. He went over what work was needed and price, then showed me what was done.
Disconnected hard wiring to dishwasher; replaced outlet under sink with surge protector outlet.
Disconnected hard wiring to dishwasher; replaced outlet under sink with surge protector outlet.
★★★★★
I cannot say enough good things about Caedon and Tyler! They came out to fix a plug for us and were the definition of professional and skilled. They were patient, incredibly thorough and detailed with their work, and knew exactly how to get the job done efficiently. To top it all off, they left the area brilliantly clean when they were finished. Exceptional service from two fantastic gentlemen - highly recommend!
Maintenance Membership
Join the Care Club
Total home service care, on a schedule.
Members get priority scheduling, seasonal HVAC tune-ups, an annual plumbing & electrical safety inspection, and exclusive discounts — for less than the cost of a single emergency call.
- Priority scheduling
- Seasonal HVAC tune-ups
- Annual safety inspection
- Exclusive member discounts
- Free dispatch on repairs
- No long-term contracts
Frequently Asked Questions
When in the remodel process should I call an electrician?
Ideally before demolition begins. Getting an electrician involved early means we can flag issues with the existing wiring, contribute to the layout plan, and be ready to rough-in as soon as framing is done. Calling late in a project often costs more and causes delays.
Do I need a permit for electrical work in a remodel?
Yes. Any new circuit, panel work, or significant wiring change in the Denver area requires a permit. We handle the permit application and inspection coordination — this protects you and ensures the work is documented for future homeowners or buyers.
Can Done work with my existing general contractor?
Absolutely. We’ve worked alongside GCs throughout the Denver metro since 1999. We communicate directly with your project manager, show up at scheduled phases, and don’t hold up your timeline.
What happens if my panel can't support the new circuits my remodel requires?
We assess panel capacity as part of the project consultation. If an upgrade is needed, we’ll let you know upfront. A remodel is actually the best time to upgrade a panel — walls are already open and the cost is easier to absorb within the project budget.
*Offers cannot be combined with other promotions or applied to dispatch fees. No cash value. Must present offer at time of service. Call for details.
