Yes, Done’s plumbers replace washing machine supply hoses — and it’s a job worth taking seriously. Washing machine hose failure is one of the leading causes of significant water damage in homes. A burst hose can release hundreds of gallons of water in a short time, and in a finished basement or laundry room adjacent to living space, the resulting damage can be extensive and costly. Done replaces old or worn hoses with quality braided stainless steel hoses and properly inspects the connections while we’re at it.

Why Washing Machine Hoses Fail

Standard rubber washing machine hoses have a finite lifespan — most manufacturers and insurance companies recommend replacement every three to five years, regardless of visible condition. The rubber degrades from the inside out due to constant pressure cycling, heat, and water chemistry. A hose that looks fine on the exterior may be brittle and on the verge of failure internally.

Colorado’s hard water accelerates fitting corrosion at the connection points, and the wide temperature swings in unheated utility rooms and basement laundry areas stress the hose material over time. If your home is more than five years old and you’ve never changed the washing machine hoses, they’re due — full stop.

Braided Stainless Steel vs. Rubber Hoses

When Done replaces washing machine hoses, we use braided stainless steel supply hoses rather than rubber. The stainless braid acts as a secondary containment layer — if the inner rubber liner begins to fail, the braid holds until the problem is noticed rather than allowing a catastrophic burst. They’re also more resistant to kinking, UV degradation, and rodent damage than plain rubber hoses.

Braided hoses are available in burst-proof configurations with an inner tube and stainless outer mesh that genuinely limits the failure mode. For laundry areas in finished parts of the home, the investment is well worth it.

What Done Checks During Hose Replacement

  • Condition of the supply valves (shutoff valves) behind the washer — these are often corroded or difficult to turn after years of disuse, and a valve that can’t be closed quickly in an emergency is a serious liability
  • Water pressure at the connection point — very high pressure accelerates hose wear and stresses fittings
  • Hose length and routing — a kinked or sharply bent hose creates a stress point that leads to early failure
  • Drain hose and standpipe configuration — proper drain hose height and a correctly sized standpipe prevent siphoning and overflow

The Case for a Washing Machine Shutoff Valve Upgrade

If the supply valves behind your washing machine are old, stuck, or showing corrosion at the packing nut, Done can replace them while we’re already working in that area. A quarter-turn ball valve is far more reliable than an old-style gate valve, and it can actually be operated in an emergency rather than requiring significant force or a tool. Some homeowners also choose to install an automatic flood-stop valve that shuts off water supply to the washing machine if it detects flow beyond a normal cycle — useful if you travel or run laundry when you’re away from home.

Scheduling Hose Replacement

Washing machine hose replacement is a quick job — typically completed in under an hour. It can often be bundled with other plumbing work or added to a service call for something else in the same area. Done serves the entire Denver metro and is available for same-day appointments for many non-emergency plumbing tasks.

Don’t wait for a burst hose to prompt the upgrade. Visit our pipes and supply lines page or our full plumbing services overview to learn more — then contact Done to get your washing machine hoses replaced before they become a problem.