How Do I Keep A P-Trap From Drying Out?
Pour a quart of water down unused drains monthly, add a little oil to slow evaporation, or have a trap primer installed…
Read AnswerFrequently Asked Questions
Straight answers to the questions our customers ask most — covering plumbing, heating, cooling, and electrical service across our service area.
What If There Is No Room For A P-Trap?
When space is tight, a licensed plumber can use a bottle trap, offset drain arm, or rerouted line — omitting the trap…
Read AnswerHow Much Water Should Be In My Toilet Tank?
Toilet tank water should sit about one inch below the overflow tube — too low causes weak flushes, too high causes constant…
Read AnswerHow Much Water Should Be In The Toilet Bowl After Flushing?
After flushing, the toilet bowl should refill to cover the trap opening — a level that's too low or too high signals…
Read AnswerHow Do I Raise the Water Level in a Toilet Tank?
Adjust the fill valve inside the tank — turn the adjustment screw or slide the float up — so water sits about…
Read AnswerHow To Set Toilet Water Level
Set toilet water level about one inch below the overflow tube by adjusting the fill valve — ball-float valves use a bent…
Read AnswerHow High Should Water Be In A Toilet Tank?
Toilet tank water should sit about one inch below the overflow tube opening — adjust the fill valve float up or down…
Read AnswerIs Mold Around the Toilet Always Caused by Plumbing Problems?
Mold around a toilet isn't always from a plumbing leak — condensation, poor ventilation, and a failed wax ring are all common…
Read AnswerCan a Toilet Leak Cause Mold Without Any Water on the Floor?
A toilet can cause hidden mold through slow wax-ring or supply-line leaks that saturate subfloor material without ever leaving visible water on…
Read AnswerWhy Does Mold Keep Coming Back Around My Toilet?
Mold returns around toilets because the moisture source — condensation, a wax ring leak, a dripping supply line, or poor ventilation —…
Read AnswerNo FAQs match your search.
